Lexmark 91E Printer User Manual


 
Turn the printer off, wait about 10 seconds, and then turn the printer back on.
Note: Make sure the printer is not in Sleep mode. Press and hold
for three seconds to turn off the printer.
See the User's Guide or visit the Lexmark Support Web site at http://support.lexmark.com for more information.
Ink Cartridge Missing
Try one or more of the following:
Install the specified missing ink cartridge or cartridges.
Reinsert the specified ink cartridge or cartridges.
If a Cartridge Finder widget has been downloaded to your printer, then touch Find Ink.
The Cartridge Finder solution available in the SmartSolutions menu appears.
Touch OK to clear the message.
See the User's Guide or visit the Lexmark Support Web site at http://support.lexmark.com for a list of supported
ink cartridges.
Ink Cartridge Unsupported
Try one or more of the following:
Replace the unrecognized ink cartridge with one that is supported by your printer.
If a Cartridge Finder widget has been downloaded to your printer, then touch Find Ink.
The Cartridge Finder solution available in the SmartSolutions menu appears.
Touch OK to clear the message.
See the User's Guide or visit the Lexmark Support Web site at http://support.lexmark.com for a list of supported
ink cartridges.
Ink Low
You may need to replace the specified ink cartridge soon. Try one or more of the following:
If a Cartridge Finder widget has been downloaded to you printer, then touch Find Ink.
The Cartridge Finder solution available in the SmartSolutions menu appears.
Touch OK to clear the message and continue printing.
Note: Depending on your printer settings, you may not be allowed to continue printing until you replace the
specified cartridge.
See the User's Guide or visit the Lexmark Support Web site at http://support.lexmark.com for a list of supported
ink cartridges.
Load [Paper Source] with [Size] Paper
Try one or more of the following:
Load the specified paper in the tray.
Touch Paper Loaded, Continue to clear the message and continue printing.
Press to cancel the current job.
Troubleshooting 139