Lexmark 91E Printer User Manual


 
Sending e-mail
ADF Scanner glass
Use the ADF for multiplepage documents.
Note: The ADF is available only in select printer models. If you
purchased a printer without an ADF, then load original
documents or photos on the scanner glass.
Use the scanner glass for single pages, small items (such
as postcards or photos), transparencies, photo paper, or
thin media (such as magazine clippings).
Tips for emailing
Make sure to enter your email account information and set up the SMTP server before sending an email.
Make sure the printer is connected to an Ethernet or wireless network before sending an email.
If necessary, make sure the network is connected to the Internet for the printer to communicate with the SMTP
server. If the printer cannot connect to the Internet, then contact your system support person.
The printer supports only one active network connection (Ethernet or wireless) at a time.
Add contacts to your address book. When sending an email, you can just select contacts from your address book
instead of typing their email addresses repeatedly.
Use the ADF when scanning twosided pages if your printer supports duplex scanning and the ADF supports the
original document size.
Use the scanner glass when scanning twosided pages if your printer does not support duplex scanning or the ADF
does not support the original document size.
When using the ADF, adjust the paper guides on the ADF to the width of the original document.
To easily retrieve a document after copying or scanning, lift the ADF input tray.
When using the scanner glass, close the scanner cover, if possible, to avoid dark edges on the scanned image.
Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings)
into the ADF. Place these items on the scanner glass.
When the document to be e-mailed is in place with the settings you want, press to start scanning.
E-mailing 69