Filter
Top Products
18
206-4183
Set HCS6320 RF Channels
With the Controller Menu on display, type the appropriate RF start channel number in the data
entry eld at the right of the Set Start RF Channel eld. Then, click on the Set button.
The remaining channels will be automatically assigned per EIA-542 STD CATV frequency
allocation standards, and the system will display the channel assignments for the card slots
(see example under “Read the RF Channel Map” below).
Read the RF Channel Map
With the Controller Menu on display, click on the Read button at the right of the Read RF Map
eld to display the current channel assignments, for example:
Channel Map:
--------+-----------
Cards | RF Channel
--------+-----------
1, 2 | 2
4, 5 | 3
8, 9 | 4
11, 12 | 5
--------+-----------
Display a List of Transcoder Cards Installed in the Chassis
There are two options for listing transcoder cards installed in the chassis: one (List Cards)
identifies the type of transcoder cards and the cards’ serial numbers, while the other (List
Card Details) identifies the type of transcoder cards, along with the cards’ hardware and
software version information. See sample displays below and on the following page.
With the Controller Menu on display, either click on the List button at the right of the List
Cards eld, or click on the List button at the right of the List Card Details eld.
Example: List Cards Display
Available cards:
Card 1: [HCS7720] [001-12080017]
Card 2: [HCS7720] [001-12080018]
Card 3: [-]
Card 4: [HCS7720] [001-12080019]
Card 5: [HCS7720] [001-12080020]
Card 6: [-]
Card 7: [-]
Card 8: [HCS7720] [001-12080021]
Card 9: [HCS7720] [001-12020006]
Card 10: [-]
Card 11: [HCS7720] [001-12080023]
Card 12: [HCS7720] [001-12080024]
Conguration Options via GUI (Cont.)