Filter
Top Products
ConsoleServer 3200 System Lightwave Communications
Rev. A - 30 - www.lightwavecom.com
Standard DB9 or DB25 installation:
Materials:
• SCS3230 device port
• device with RS-232-C serial console port
• RJ45-terminated Cat 5 cable (standard LAN cable)
• Lightwave adapter for serial console port
1. Attach the Lightwave adapter to the serial console port.
2. Connect the Cat 5 cable to the adapter. Connect the other end to the SCS3230 device
port.
3. Check that the device port and serial console port communications parameters match,
and synchronize them if they do not match.
Sun® Netra t1 installation:
Materials:
1. Connect a Cat 5 cable to the console port of the Netra. Connect the other end to the
end of the ConsoleServer/Netra adapter (P/N 200.0225) marked “to Netra”.
2. Connect another Cat 5 cable between the adapter end marked “ConsoleServer” and the
ConsoleServer device port.
3. Check that the device port and serial console port communications parameters match,
and synchronize them if they do not match.