Filter
Top Products
A Lantronix Company SCS3230 System Administrator's Guide
15.00.038 - 77 - May 2002
8.4 Overview of Commands
Several levels of access are available to the user, from simple access of the SCS3230 to direct
access of servers attached to the SCS3230. Many of the commands are sensitive to which
level the user is in, and not all commands are available at all levels.
The first prompt the user should see after connecting to the SCS3230 is the LCI3200> prompt
(additional information may be on the screen as indicated in the sections above). This indicates
that the user is not currently logged in and that no servers may be reached through the
SCS3230. The prompt will change to reflect the level in which the user is, and in monitor mode,
will also indicate which server is selected.
The help screens also change according to the user's login level. There are separate
help screens for a logged out user, a logged in user, and a user in monitor (a.k.a.
device) mode.
LOGGED OUT HELP:
F1 - Display Help Screen (VT100 mode)
F2 - Display Pull Down Menu (VT100 mode)
TTY COMMANDS:(LOGGED OUT MODE)
LOGIN - Login with ID and Password
INFO - Display System Info
LOGGED IN HELP:
F1 - Display Help Screen (VT100 mode)
F2 - Display Pull Down Menu (VT100 mode)
TTY COMMANDS: (LOGGED IN MODE)
LOGOUT,LOGOFF - Logout
SELECT [SERVER NAME\#] - Select a server by name or number
LISTEN [SERVER NAME\#] - Listen to a server by name or number
DISELECT[SERVER NAME\#] - Select a server and enter direct mode
CHANGEPSWD or PASSWD - Change user password
CONNECTIONS - Display connections list
DEVLIST - Display installed devices list
EDITESC - Edit direct mode escape sequence
EDITBRK - Edit Break generation escape sequence