Lightwave Communications SCS3230 Server User Manual


 
A Lantronix Company SCS3230 System Administrator's Guide
15.00.038 - 67 - May 2002
It is recommended that the default modem initialization string be used unless the application
requires that it be changed. The default initialization string is ATH0S0=1, which disconnects any
active phone connections when the initialization string is sent, and sets the modem to auto-
answer on one ring.
7.9 Status Commands
There are six commands which allow the sys admin to check the status of the
SCS3230: CONNECTIONS, LISTCARDS, VERSION, INFO, POWERSTATUS and LOG.
7.9.1 CONNECTIONS Command
The sys admin may monitor the status of connections made through the terminal cards
by using the CONNECTIONS command. This command will display all the active
connections and the mode of those connections as follows:
sys admin>>CONNECTIONS
Terminal Connection List
01 KEVIN 01 SERVER ( Monitor mode )
02 00 ( Channel present )
03 00 ( Channel present )
04 00 ( Channel present )
05 00 ( Channel present )
06 00 ( Channel present )
07 00 ( Channel present )
08 00 ( Channel present )
09 00 ( Channel present )
10 00 ( Channel present )
11 00 ( Channel present )
12 00 ( Channel present )
13 00 ( Channel present )
14 00 ( Channel present )
15 00 ( Channel present )
16 00 ( Channel present )
17 <not installed>
sys admin>>
The above example shows that user KEVIN is logged in on terminal port 01, is
connected to device port 01 (which is named "Server" in the SCS3230), and is in
monitor mode. The list will display the user ID of any logged-in users, the device port to
which they are connected, the device name assigned to that port, and the mode of that
connection (see sections 7.8, 7.9, and 7.10 for an explanation of the various connection
modes). If the user is not connected to any device, they shall simply be listed as "User
Logged-In".
When used with the /MONITOR command line qualifier, the CONNECTIONS command
updates the connection list on screen every time a user logs in or out or changes login level
(i.e., goes into direct mode), rather than simply displaying the list once as occurs when the