Filter
Top Products
The Hub’s Ports
1-5 Ports 1-5 are where you will connect your PCs to the hub.
It is through these ports that network information is
exchanged.
Uplink You can expand your network by connecting your hub to
another hub, switch, router or Broadband modem through
the Uplink port. If the Uplink port is being used, the port
adjacent to it will become inactive, reducing the hub’s oper-
able ports from five to four.
10/100 Network In a Box
5
Linksys EtherFast
®
Series
4
The EtherFast 10/100 5-Port Workgroup Hub
Your network revolves around your hub. You can not connect your computers
directly to one another. You must connect them through your hub.
The Hub’s LEDs
PWR The Power LED will illuminate when the the hub is receiv-
ing power.
100 The 100 LED will illuminate if the port is operating at
(per port) 100Mbps. The LED will be off if the port is running at
10Mbps.
LINK/ACT The LINK/ACT LED will illuminate if the port has an
(per port) active network connection. The LED will flicker if the port
is receiving or sending data.