Filter
Top Products
27
Chapter 6: Configuring the PrintServer Using the Web-based Utility
The Printer Tab - Logical Port
Wireless-G PrintServer
The Printer Tab - Logical Port
The Logical Printers tab contains the logical printer settings of the PrintServer. Configure them for each Logical
Printer.
The PrintServer has six logical or virtual printer ports. For example, you can have three different configurations
for your parallel printer: Logical Printer 1 for landscape orientation, Logical Printer 2 for double-sided copies, and
Logical Printer 3 for manual feed. Then you will map Logical Printers 1, 2, and 3 to the physical printer on the
PrintServer’s Parallel port.
Select Printer
Logical Printer No. From the Logical Printer Port No: drop-down menu, select the number (1-6) of the printer you
wish to configure. Click the Get Data button to update the display with the current data for the selected logical
printer.
Details
Pre-string (Hex). Enter the printer control string (in hexadecimal characters) to be sent to the printer before each
print job. This string cannot exceed 30 characters.
Post String (Hex). Enter the printer control string (in hexadecimal characters) to be sent to the printer after each
print job. This string cannot exceed 30 characters.
Convert LF to CR+LF. If checked, LF (line feed) characters are changed to CR+LF (carriage return + line feed).
Click the Save button to apply your changes, or click Cancel to cancel your changes.
Figure 6-10: Printer - Logical Port