Filter
Top Products
35
Wireless-G PrintServer
Chapter 7: Bi-Admin Management
The Bi-Admin Management Utility
• Configure. You may configure the PrintServer with this option.
If you click Configure, the Configuration screen will appear. It displays eight tabs: System, TCP/IP, AppleTalk,
NetBEUI, Internet Printing, Port, Wireless, and SNMP. The tabs will be described below.
System
• Device Name. Enter the Device Name in the field provided.
• Comment. Enter any comments in the Comment field.
• Device Password. To change the password, select Change Device Password, enter the new password
in the Password field, and then re-enter the password in the Confirm Password field.
• Protocol. Select the protocol you want to use for your network: TCP/IP, AppleTalk, NetBEUI, IPX/SPX.
Click the Get Defaults button if you want to cancel your changes and use the default settings.
When finished making your changes on this tab, click the OK button to save these changes, or click the
Cancel button to undo your changes. For more information, click the Help button.
Figure 7-10: Configuration - System