Filter
Top Products
SFE2010/SFE2010P Administration Guide 18
System Configuration
Using the Console
Versions
Use the Versions screen to display the boot, software, and hardware firmware versions of the
Ethernet switch. In stacking mode, this information is displayed for the stack master.
To open this screen:
1. From the Sw
itch Main Menu, select 1. System Configuration.
2. From the Sy
stem Configuration Menu, select 1. System Information.
3. From the Sys
tem Information Menu, select 1. Versions.
General Information
Use the General System Information screen to view the system description, system up time, and
system MAC address. You also can enter a system contact, system name, and system location.
To open this screen:
1. From the S
w
itch Main Menu, select 1. System Configuration.
2. From the Sy
stem Configuration Menu, select 1. System Information.
3. From the Sys
tem Information Menu, select 2. General System Information.