Filter
Top Products
SFE2010/SFE2010P Administration Guide 35
System Configuration
Using the Console
To edit the ISATAP tunnel settings
1. Select Edit., and then make the changes. Press the Tab key to move the cursor from one
field to the next.
NOTE: To enable or disable the ISATAP tunnel, move the cursor to the Sta
tus field, and then
press the Space Bar to toggle between ENABLE and DISABLE.
2. Press the Esc ke
y to move the cursor to the Action list.
3. Select Sav
e to save your settings
4. When the Oper
ation complete message appears, press the Esc key to move the cursor to the
Action list.
IPv6 ISATAP Interface Show
You can use the
ISATAP Interface Show screen to view the interface type and address.
To open this screen:
1. From the Sw
itch Main Menu, select 1. System Configuration.
2. From the Sy
stem Configuration Menu, select 6. IP Configuration.
3. From the IP
Configuration menu, select 2. IPv6 Address Configuration.
4. From the IP
v6 Address Configuration menu, select 5. ISATAP Interface Show.