Linksys SFE2010 Switch User Manual


 
SFE2010/SFE2010P Administration Guide 47
Port Status
Using the Console
Stack Configuration
You can use the Stack Configuration screen to specify the Stack ID for the Ethernet switch. By
default, ID numbers are automatically assigned to each device.
To open this screen:
1. From the S
w
itch Main Menu, select 1. System Configuration.
2. From the Sy
stem Configuration Menu, select 11. Stack Configuration.
Port Status
The Port Status menu provides access to screens where you can view the port status and the
PoE status for each port on the switch.
1. Port Status (see page 48)
2. PoE Status (see page 48)
0.Back (Select to return to the previous screen.)
To open this screen:
From the S
witch Main Menu, pr
ess 2. Port Status.