Filter
Top Products
SFE2010/SFE2010P Administration Guide 31
System Configuration
Using the Console
4. From the IPv4 Address Configuration menu, select 1. IPv4 Address Settings.
To edit the IPv4 address settings:
1. Select Ed
i
t., and then make the changes. Press the Tab key to move the cursor from one
field to the next.
NOTE: To enable or disable the DHCP client, move the cursor to the field, and then press the
Sp
ace Bar to toggle between ENABLE and DISABLE.
2. Press the Esc ke
y to move the cursor to the Action list.
3. Select Sav
e to save your settings
4. When the Oper
ation complete message appears, press the Esc key to move the cursor to the
Action list.
DHCP Renew
You can select this option to renew DHCP.
NOTE: T
his option is available only if the interface is configured as a DHCP interface, through
IP
v4 Address Settings.
To renew DHCP:
1. From the S
w
itch Main Menu, select 1. System Configuration.
2. From the Sy
stem Configuration Menu, select 6. IP Configuration.
3. From the IP
Configuration menu, select 1. IPv4 Address Configuration.
4. From the IP
v4 Address Configuration menu, select 2. DHCP Renew. The Operation Complete
message appears.
IPv6 Address Configuration
The IPv6 Configuration menu provides access to screens where you can manage the settings for
IPv6 and ISATAP.