Linksys SFE2010 Switch User Manual


 
SFE2010/SFE2010P Administration Guide 37
System Configuration
Using the Console
HTTP Configuration
You can use the HTTP screen to view and edit the HTTP settings.You can enable or disable the
HTTP server and configure the port on which the session is enabled.
To open the screen:
1. From the Sw
itch Main Menu, select 1. System Configuration.
2. From the Sy
stem Configuration Menu, select 6. IP Configuration.
3. From the IP
Configuration menu, select 3. HTTP Configuration.
To change the HTTP settings:
1. Select Ed
i
t, and then make your changes.
2. Press the Esc ke
y to move the cursor to the Action list.
3. Select Sav
e to save your changes.
4. When the Oper
ation complete message appears, press the Esc key to move the cursor to the
Action list.
HTTPS Configuration
Use the HTTPS Configuration screen to configure HTTPS settings. You can enable or disable the
HTTPS server and configure the port on which the session is enabled.