Filter
Top Products
SFE2010/SFE2010P Administration Guide 46
System Configuration
Using the Console
Restore System Default Settings
You can restore the switch to the system default settings.
To restore system default settings
1. From the S
w
itch Main Menu, select 1. System Configuration.
2. From the Sy
stem Configuration Menu, select 8. Restore System Default Settings.
3. When the confirmation message appears, press y to r
estore the default settings, or press n
to cancel.
NOTE: Restoring default settings from the console or web resets all values except stacking
c
onfiguration (stacking mode, stacking ports, and auto-numbering settings are not reset). To
reset stacking configuration, use the hardware reset button on the front of the Ethernet switch.
Reset to Factory Settings
You can restore the switch to the factory default settings.
To restore factory default settings
1. From the S
w
itch Main Menu, select 1. System Configuration.
2. From the Sy
stem Configuration Menu, select 9. Restore Factory Settings.
3. When the confirmation message appears, press y to r
estore the default settings, or press n
to cancel.
NOTE: Restoring factory settings from the console or web resets all values except stacking
c
onfiguration (stacking mode, stacking ports, and auto-numbering settings are not reset). To
reset stacking configuration, use the hardware reset button on the front of the Ethernet switch.
Reboot System
You can restart the Ethernet switch.
To restore system default settings
1. From the S
w
itch Main Menu, select 1. System Configuration.
2. From the Sy
stem Configuration Menu, select 10. Reboot System.
3. When the confirmation message appears, press y to r
estore the default settings, or press n
to cancel.