Linksys SFE2010 Switch User Manual


 
SFE2010/SFE2010P Administration Guide 26
System Configuration
Using the Console
SSL Generate Certificate
Use the SSL Certificate Generation screen to view, edit, and execute device-generated
certificates.
To open this screen:
1. From the S
w
itch Main Menu, select 1. System Configuration.
2. From the Sy
stem Configuration menu, select 4. Security Settings.
3. From the Sec
urity Settings Menu, select 1. SSL Generate Certificate.
To edit and execute a certificate:
1. Select Ed
i
t, and then make your changes. Press the Tab key to move the cursor from field to
field.
2. Press the Esc ke
y to move the cursor to the Action list.
3. Select Exec
ute to generate the certificate with the new parameters.
4. When the Oper
ation complete message appears, press the Esc key to move the cursor to the
Action list.
The following fields are specified:
Public Key Algorithm Specifies the SSL type
Public Key Length Specifies the SSL RSA key length. (Range: 512 to 2048)
Common Name (FQCN) IP address of the Ethernet switch
Department Name Specifies the department name. (Range: 1 to 32 characters)
Organization Name Specifies the organization name. (Range: 1 to 32
characters)
Locality or City Name Specifies the location or city name. (Range: 1 to 32
characters)
State or Province Name Specifies the state or province name. (Range: 1 to 32
characters)