Linksys SFE2010 Switch User Manual


 
SFE2010/SFE2010P Administration Guide 33
System Configuration
Using the Console
3. Select Save to save your settings
4. When the Oper
ation complete message appears, press the Esc key to move the cursor to the
Action list.
5. When you are finished working on this screen, select Qui
t.
IPv6 Address Settings
You can use the IP
v6 Address - Configuration screen to edit the IPv6 address settings.
To open this screen:
1. From the Sw
itch Main Menu, select 1. System Configuration.
2. From the Sy
stem Configuration Menu, select 6. IP Configuration.
3. From the IP
Configuration menu, select 2. IPv6 Address Configuration.
4. From the IP
v6 Address Configuration menu, select 2. IPv6 Address Settings.
To edit the IPv6 address settings:
1. Select Ed
i
t., and then make the changes. Press the Tab key to move the cursor from one
field to the next.
NOTE: To enable or disable the DHCP client, move the cursor to the field, and then press the
Sp
ace Bar to toggle between ENABLE and DISABLE.
2. Press the Esc ke
y to move the cursor to the Action list.
3. Select Sav
e to save your settings
4. When the Oper
ation complete message appears, press the Esc key to move the cursor to the
Action list.