Filter
Top Products
Telephone Features
32
Telephone Features
DEFINITY Enterprise Communications Server Release 8.2
Overview
555-233-002
Issue 1
April 2000
Manual Originating Line Service
Connects single-line telephone users to the attendant automatically when the user lifts
the handset. The attendant number is stored in an Abbreviated Dialing list. When the
telephone user lifts the handset, the system automatically routes the call to the attendant
using the Hot Line Service feature.
Trunk Flash
Trunk Flash allows a feature or function button on a multifunction telephone or attendant
console to be assigned as a Flash button. Pressing this button while connected to a trunk
(which must have been administered to allow Trunk Flash) causes the system to send a
flash signal out over the connected trunk.
Trunk Flash enables multifunction voice terminals to access central office customized
services that are provided by the Central Office to which DEFINITY ECS is connected.
These services are electronic features, such as conference and transfer, that are
accessed by a sequence of flash signal and dial signals from the DEFINITY System
station on an active trunk call. The Trunk Flash feature can help to reduce the number of
trunk lines connected to the DEFINITY system. “Digit 1 as Flash” as used in Italy and the
United Kingdom will not serve as the flash button in this application.
Special Dial Tone
Provides the ability to play a Special Dial Tone whenever an analog set is not able to
receive calls. When such conditions as Call Forward All Calls, Call Forward Busy/NA,
Send All Calls or Do Not Disturb are activated on a telephone set, a Special Dial Tone lets
you know that you cannot receive any calls.
Telephone Displays
Voice Terminal Display
Provides multi-appearance telephone users with updated call and message information.
This information is displayed on a display-equipped telephone. The information displayed
depends upon the display mode selected by the user. Information that allows
personalized call answering is available on many calls.
Users may select any of the following as the display message language: English (default),
French, Italian, or Spanish. In addition, messages can be administered on the system in a
fifth language. The language for display messages is selected by each user.
233002_1.book Page 32 Monday, February 21, 2000 8:28 AM