Marantz PD4292D Computer Monitor User Manual


 
25
Basic Operations
POWER
To turn the unit ON and OFF:
1. Plug the power cord into an active AC power outlet.
2. Press the POWER ON button (on the remote control-
ler) to turn on.
The monitor’s POWER/STANDBY indicator will light
up(green) when the unit is on.
3. Press the POWER OFF button (on the remote control-
ler or the unit) to turn off.
The monitor’s POWER/STANDBY indicator turns red
and the standby mode is set (only when turning off the
unit with the remote control).
VOLUME
To adjust the volume:
1. Press and hold the VOLUME button (on the remote
controller or the unit) to increase to the desired level.
2. Press and hold the VOLUME button (on the remote
controller or the unit) to decrease to the desired level.
MUTE
To cancel the sound:
Press the MUTE button on the remote controller to cancel
sound; press again to restore.
DISPLAY
To check the settings:
1. The screen changes each time the OSD button is
pressed.
2. If the button is not pressed for approximately three sec-
onds, the menu turns off.
DIGITAL ZOOM
Digital zoom specifies the picture position and enlarges
the picture.
1. Press the 4-D1(ON) button to display the pointer. ( )
To change the size of the picture:
Press the 2-D1(ZOM+) button and enlarge the pic-
ture.
The pointer will change to resemble a magnifying
glass. ( )
A press of the 2-D2(ZOM-) button will reduce the
picture and return it to its original size.
To change the picture position:
Select the position with the ▲▼ᮤ ᮣ buttons.
2. Press the 4-D1(ON) button to delete the pointer.
PD4292D-2 00.10.4, 3:11 PM25