Filter
Top Products
42
Setting the gray level for the sides of the screen
Use this procedure to set the gray level for the parts on the
screen on which nothing is displayed when the screen is
set to the 4:3 size.
Example: Adjusting the "GRAY LEVEL"
Press the 3-D1(ON) button on the remote controller to
display the MAIN MENU on the screen, then...
1. Use the ▲ and ▼ buttons to select “FUNCTION”, then
press the 3-D1(ON) button.
The “FUNCTION” screen appears.
2. Use the ▲ and ▼ buttons to select “GRAY LEVEL”.
3. To adjust the "GRAY LEVEL"...
Use the ᮤ and ᮣ buttons to adjust the GRAY LEVEL.
5. Once the setting is completed ...
Press the “OK” button to return to the main menu.
The delete the main menu, press the “OK” button once
more.
Information
Ⅵ GRAY LEVEL
This adjusts the brightness of the black (the gray level)
for the sides of the screen.
The standard is 0 (black). The level can be adjusted from
1 to 15. The factory setting is 3 (dark gray).
Ⅵ Restoring the factory default settings
Select “RESET” under the function menu. Note that this
also restores other settings to the factory defaults.
FUNCTION
OSM
OSM ADJ.
POWER MGT
GRAY LEVEL
PLE+INVERSE
CINEMA MODE
RESET
ON
1
OFF
3
AUTO
AUTO
:
:
:
:
:
:
SEL. ADJ. RETURN
EXIT
FUNCTION
OSM
OSM ADJ.
POWER MGT
GRAY LEVEL
PLE+INVERSE
CINEMA MODE
RESET
ON
1
OFF
9
AUTO
AUTO
:
:
:
:
:
:
SEL. ADJ. RETURN
EXIT
Setting the brightness level to the minimum
Locking this mode allows you to dim the picture.
Example: Setting the “PLE+INVERSE” to “LOCK”
Press the 3-D1(ON) button on the remote controller to
display the MAIN MENU on the screen, then...
1. Use the ▲ and ▼ buttons to select “FUNCTION”, then
press the 3-D1(ON) button.
The “FUNCTION” screen appears.
2. Use the ▲ and ▼ buttons to select “PLE+INVERSE”.
3. To set the PLE+INVERSE to "LOCK" ...
Use the ᮤ and ᮣ buttons to select “LOCK”.
The mode switches as follows each time the ᮤ or ᮣ
button is pressed:
AUTO ↔ LOCK ↔ LOCK+ON ↔ AUTO+ON
4. Once the setting is completed ...
Press the “OK” button to return to the main menu.
The delete the main menu, press the “OK” button once
more.
Information
Ⅵ PLE+INVERSE
AUTO ............Normally set to AUTO.
LOCK ............Sets the brightness level to the mini-
mum.
AUTO+ON .....Turns on the inverse function.
LOCK+ON .....Turns on the inverse function as well
as the lock function.
Ⅵ Restoring the factory default settings
Select “RESET” under the function menu. Note that this
also restores other settings to the factory defaults.
FUNCTION
OSM
OSM ADJ.
POWER MGT
GRAY LEVEL
PLE+INVERSE
CINEMA MODE
RESET
ON
1
OFF
3
AUTO
AUTO
:
:
:
:
:
:
SEL. ADJ. RETURN
EXIT
FUNCTION
OSM
OSM ADJ.
POWER MGT
GRAY LEVEL
PLE+INVERSE
CINEMA MODE
RESET
ON
1
OFF
3
LOCK
AUTO
:
:
:
:
:
:
SEL. ADJ. RETURN
EXIT
PD4292D-2 00.10.4, 3:11 PM42