Filter
Top Products
Extended AT Commands Manual Page 33 of 70 2009-06-25
304 invalid PDU mode parameter
305 invalid text mode parameter
310 (U)SIM not inserted
311 (U)SIM PIN required
312 PH-(U)SIM PIN required
313 (U)SIM failure
314 (U)SIM busy
315 (U)SIM wrong
316 (U)SIM PUK required
317 (U)SIM PIN2 required
318 (U)SIM PUK2 required
320 memory failure
321 invalid memory index
322 memory full
330 SMSC address unknown
331 no network service
332 network timeout
340
no +CNMA acknowledgement expected
500 unknown error
…511
other values in range 256...511 are reserved
512…
manufacturer specific
8.1.1.5. Informative Examples
Setting up a TA supporting SMS:
AT+CSMS=? (inquiry of available services in TA)
+CSMS: (0) OK
AT+CSMS=0;+CPMS=? (set SMS; query available memories)
+CSMS: 1,1,1 (all MT, MO and CBM supported)
+CPMS: ("BM","ME","SM"),("ME","SM"),("ME","SM") (CBM, ME and (U)SIM memories
OK for reading, ME and (U)SIM memories for writing)
AT+CPMS="ME","ME","ME";+CMGF=? (set ME memory; query available message
formats)
+CPMS: "ME",5,99,"ME",5,99,"ME",5,99 (five messages in ME, 99 total space)
+CMGF: (0,1) (both text and PDU mode implemented)
OK
AT+CMGF=1;+CSCS=? (select text mode; query available TE character
sets)
+CSCS: ("IRA","PCCP437","8859-1")
OK
AT+CSCS="PCCP437" (select PC code page 437)
OK
Message Configuration Commands
8.1.1.6. Service Centre Address +CSCA
Set command updates the SMSC address, through which mobile originated SMs are transmitted.
In text mode, setting is used by send and write commands. In PDU mode, setting is used by the