Filter
Top Products
Extended AT Commands Manual Page 46 of 70 2009-06-25
9. SMS Processing Options
9.1.1. SMS Send and Receive Options
9.1.1.1. SMS Mail Notification Option (SMSOPT=AB)
A value is set to skip SMS notification message
Notify TE2
Å
MT2 Message (message only)
Response TE2
Å
MT2
$$SMSOPT=AB
A ADDED VALUE FOR SMS NOTIFICATION, B IS THE
OLD VALUES 0~3 OPTIONS
Value
0: SMS sent notification On
1: SMS sent notification Off
9.1.1.2. SMS FORMAT (send and receive)AT$$SMSOPT
Read command
Command TE2
Æ
MT2 $$SMSOPT?
Response TE2
Å
MT2 $$SMSPOT: <value>
Value
0: SMS structure (Send and Receive is as per 3G standards)
1: At+MMC SMSMO (same format as MM5100 for send and receive.
2: +CGMR Format.
3. Sending/Receiving format is same as MM5100 but modem should only
pass the message to host.
Received SMS:
<time stamp>:
<orig_number>: Originating number
<call_back>: Callback number
<user_data>: Message
With this option set the message appear as below. No other information is
displayed. Only user data is passed to the host. Even User Data before the
message is not displayed.
With Option 3 set.
Message
Message Æ no other information is passed except user data or the
message.
Table 9-54 Set command
Command TE2
Æ
MT2 $$SMSOPT=<value>
Response TE2
Å
MT2 <result_code> (OK | ERROR)