Filter
Top Products
Extended AT Commands Manual Page 70 of 70 2009-06-25
16. CARRIER COMMAND OPTIONS
16.1.1. Debug screen (AT$$DBGSCRN)
This command reads Debug Screen Data for the purpose of a field test.
Table 16-90 Read command
Command TE2
Æ
MT2 $$DBGSCRN
Response TE2
Å
MT2 $$DBGSCRN: <value>
Value
MCC: Country Code, MNC: Network Code, WCDMA: Frequency
CH: Channel, DRX: Discontinuous Reception :WCDMA: System
Rx: Receive signal Tx: Sending Signal RSCP: Base Station signal
Ciphering: x Intergaty: x , PC: power class
PSC: Scrambling code
ECIO: Error Check and Correction
GL1: GSM Layer 1 Status WL1:WCDMA Layer 1 Status
RR : GSM RR Status RRC: WCDMA RRC Status
MM: MM Status, GMM: GMM Status
GRR: GRR Status REG: Reg status
Network Status: Network Revision, mm system information, Network
operation mode, Temporary Mobile Subscriber Identity
Location: Location code, serving PLMN, Cell Identity, Signalling Radio Bearer
Example
MCC:505, MNC:01, WCDMA: 850
CH:4436, DRX1280M [C7 P7 U-] :WCDMA
R-54, T+0, RSCP[-57], c1i1, PC:PC03,
PSC:426
ECIO:-3
GL1:INACTIVE WL1:PCH_SLP
RR :INACTIVE RRC:DISCONNEC
MM:19MM_IDLE, GMM:REGISTRED
GRR:NULL REG:IDLE
REL99, ATT1, NMO2, TMSI:A8382C54
L0151 R01 CI1CA5 SRB0----