Configuring the Switch
3-246
3
Change any of the interface-specific protocol parameters, and then click Apply.
Figure 3-139 OSPF Interface Configuration - Detailed
CLI - This example configures the interface parameters for VLAN 1.
Console(config)#interface vlan 1
Console(config-if)#ip ospf priority 5 4-280
Console(config-if)#ip ospf transmit-delay 6 4-282
Console(config-if)#ip ospf retransmit-interval 7 4-281
Console(config-if)#ip ospf hello-interval 5 4-280
Console(config-if)#ip ospf dead-interval 50 4-279
Console(config-if)#ip ospf cost 10 4-279
Console(config-if)#ip ospf authentication message-digest 4-276
Console(config-if)#ip ospf message-digest-key 1 md5 aiebel 4-278
Console#