Filter
Top Products
Priority Commands
4-211
4
Default Setting
None
Command Mode
Privileged Exec
Example
Priority Commands (Layer 3 and 4)
map ip port (Global Configuration)
This command enables IP port mapping (i.e., class of service mapping for TCP/UDP
sockets). Use the no form to disable IP port mapping.
Syntax
[no] map ip port
Default Setting
Disabled
Command Mode
Global Configuration
Command Usage
The precedence for priority mapping is IP Port, IP Precedence or IP DSCP,
and default switchport priority.
Console#show queue cos-map ethernet 1/1
Information of Eth 1/1
CoS Value: 0 1 2 34567
Priority Queue:20134567
Console#
Table 4-69 Priority Commands (Layer 3 and 4)
Command Function Mode Page
map ip port Enables TCP/UDP class of service mapping GC 4-211
map ip port Maps TCP/UDP socket to a class of service IC 4-212
map ip precedence Enables IP precedence class of service mapping GC 4-212
map ip precedence Maps IP precedence value to a class of service IC 4-213
map ip dscp Enables IP DSCP class of service mapping GC 4-214
map ip dscp Maps IP DSCP value to a class of service IC 4-214
show map ip port Shows the IP port map PE 4-215
show map ip precedence Shows the IP precedence map PE 4-216
show map ip dscp Shows the IP DSCP map PE 4-217