Filter
Top Products
8
Troubleshooting
8-16 CF2002/CF3102
9 Open the feed guide for the finisher,
and then remove any paper.
10 Open the transport guide, and then
pull out any paper in the transport
section.
❍ If the paper cannot easily be
pulled out, stop trying to pull it
out.
❍ Pulling out the paper with too
much force may damage the
folding unit.
❍ If the paper cannot be pulled
out easily, turn the misfeed-
clearing dial in the folding
section as described in the
following step, and then pull
out the paper.
11 If the paper could not be removed in
step 10, turn the misfeed-clearing
dial in the folding section clockwise.
Feed the paper into the lower paper
output tray, and then pull it out.
12 Close the front door of the finisher.
❍ Be careful that your fingers are
not pinched when the front door
is closed.
13 Slide the finisher back against the
copier.
CF2002.book Page 16 Friday, June 13, 2003 9:29 AM