Filter
Top Products
Loading Paper
4
CF2002/CF3102 4-7
5 Load the paper into the drawer so
that the side of the paper to be
printed onto (the side facing up
when the package was unwrapped)
faces up.
6 When making manual double-sided
copies, load the paper so that the
second side (the blank side) faces
up.
?
Has the paper been loaded correctly?
If the paper is not loaded correctly, a paper misfeed may occur.
➜ Make sure that the paper is not curled when it is loaded.
➜ Do not load so much paper that the top of the stack is higher than
the
mark.
➜ Do not load more than 21 sheets of special paper.
➜ When loading additional paper, remove any paper remaining in the
drawer, place it on the new paper, and then align the paper in the
stack well before loading it into the drawer.
➜ Before loading envelopes, press them down to make sure that all
air is removed, and the folds of the flaps are firmly pressed.
➜ We recommend replenishing the paper only after all of the paper
in the drawer has been used.
?
Are postcards, or envelopes loaded?
➜ After pressing down the envelopes to make sure that all air is
removed and making sure that the folds of the flaps are firmly
pressed, load the envelopes with the shorter side as the leading
edge and with the side to be printed on facing up, as shown in the
illustration.
CF2002.book Page 7 Friday, June 13, 2003 9:29 AM