Filter
Top Products
Features and Components
3
CF2002/CF3102 3-1
3 Features and Components
3.1 Power Switch and Default Settings
Turning the Copier On and Off
To turn the copier on
➜ Set the power switch to “I”.
When the copier is turned on, the
indicator on the [Start] key lights up in
orange. A screen indicating that the
machine is starting up appears.
After a few seconds, the message “Now
warming-up. Ready to scan.” appears
on the touch panel. When the indicator
on the [Start] key lights up in green, a
job can be queued.
To turn the copier off
1 Touch [Job Log] to check that no jobs are queued.
2 If any copies or printouts remain in the output tray, remove them.
3 Set the power switch to “O”.
The following are cleared.
● Settings that are not programmed, such as the number of copies
● Data scanned using the “Scan to Memory” function
● Jobs queued to be printed
● Jobs saved with the “Memory Recall” function
Stored zoom ratios, programmed Copy mode settings, Utility mode
settings and UserBox settings are not erased.
CF2002.book Page 1 Friday, June 13, 2003 9:29 AM