Minolta PCL6 Computer Drive User Manual


 
4. Setup tab
3-7
Properties Settings
Chapter 3
NOTES
If the original document for a print job contains pages of different sizes and/or
different orientations, pages may be partially cut or overlap each other.
This setting is not available if Custom Paper is used.
TIP
The print layout is displayed in the Page Layout area.
(2) Duplex / Booklet
Specifies two-sided printing and booklet printing.
Off No setting
Short Edge Binding Two-sided printing that allows for the short edge to
be bound
Long Edge Binding Two-sided printing that allows for the long edge to
be bound
Booklet Left Binding Four pages are printed on both sides of a single
sheet of paper so that when the sheet is folded in the
middle it forms a left-bound booklet.
Booklet Right Binding Four pages are printed on both sides of a single
sheet of paper so that when the sheet is folded in the
middle it forms a right-bound booklet.
See p. 1-3 for an illustration.
NOTES
If the original document for a print job contains pages of different sizes and/or
different orientations, pages may be partially cut or overlap each other.
Two-sided printing and OHP Interleaving are not available simultaneously.
TIPS
Two-sided printing can be performed on paper of the following sizes: Letter,
Letter-R, Legal, A3, A4, A4-R, A5, B4, B5, B5-R, Invoice, 11
×
17, F4-1, F4-2,
F4-3, and F4-4.
Short Edge Binding, Long Edge Biding, Booklet Left Binding and Booklet
Right Binding will be displayed in the Page Layout area.