Filter
Top Products
4. Setup tab
3-9
Properties Settings
Chapter 3
(5) Output Setting
Allows you to select the machine’s exit tray to which the paper is to be
distributed.
Settings can also be made for finishing functions, including stapling and
folding.
• Paper exit destination Select the machine tray to which you wish to
distribute the prints.
Not Installed Primary Tray
Finisher or Booklet Finisher
Primary Tray, Secondary Tray
• Detail of Output Setting
Make stapling or folding settings. For details, see
p. 3-12.
NOTE
Some paper sizes cannot be selected. For details, refer to the User Manual of the
machine.
TIPS
• Set the type of finisher in the Device Options Setting tab.
• The paper take-up tray used is displayed in green in the Printer Figure area.