Filter
Top Products
1. Troubleshooting
4-5
Troubleshooting
Chapter 4
Unable to staple
properly.
No stapling can be per-
formed on thick paper or
OHP transparencies.
Check the type of paper.
When the Finisher is
installed, no stapling can be
performed if the number of
prints to be made exceeds
50.
Check the number of prints to be
made.
No stapling can be per-
formed if the number of
pages to be printed is 50 or
more when a Booklet Fin-
isher is mounted.
No stapling can be per-
formed if the original docu-
ment contains pages of
different sizes.
The stapling position
is opposite to what is
expected.
The paper direction and N-
up do not match the setting
made for Orientation.
Change the Orientation setting.
Folding cannot be
specified.
The optional Booklet Fin-
isher is necessary for you to
specify Folding. “Booklet
Finisher” must be selected
in the Device Options Set-
ting tab.
Select “Booklet Finisher” in the
Device Options Setting tab.
Folding may be disabled
when Staple is specified.
Check the settings made. (See
“Function combination matrix”
on p. A-2.)
Folding is not per-
formed.
Folding cannot be per-
formed if tab paper or OHP
transparencies are used.
Check the type of paper.
Unable to print an
image properly.
The machine’s available
memory space is not suffi-
cient.
Add memory to expand the
machine’s memory space or sim-
plify the image to reduce the
amount of data handled.
Symptom Possible cause Action