Filter
Top Products
5-16
Operation
Chapter 5
Menu flow chart
Pressing the keys on the control panel displays the corresponding menus as shown below.
Confirm
Previous
OK
Up to three programs of
customized settings can be
registered.
Select an external device
(printer or personal computer)
to be connected to the
Scanner.
Recalls the customized
settings previously
registered using [Program].
Displays the current settings
for the Scanner.
The shadow generated in the
center of the open book is
masked. [Auto Set] can be
selected in Book mode to
detect the center of the
original. The center of the
original is regarded as the
center of the book table when
[Cent Set] is selected. The
shadow masking width can be
set from 2.5 to 20 mm (in 2.5
mm increments).
Select Book mode when
scanning the thick original
(book), and Sheet mode when
scanning a single-page
document.
Save Data
Book Sheet
Cent Eras
Output
Previous
NO.1
NO.2
NO.3
OK
Book mode
Sheet mode
OK
(In Book mode: Set the original distance.)
(In Sheet mode: Set the original height.)
(Available only in Book mode)
Auto set
Cent set
-2.5 mm Wide
+2.5 mm Wide
OK
PC
Printer
OK
User Mode
Job Recall
Mode Check
NO.1
NO.2
NO.3
Previous
Previous
* Select [OK] to return to the main menu.