Filter
Top Products
Navigate the Menu
69
Phone Lock Settings
Activate the Automatic Key Lock
1. Select “Locks”.
2. Select "Automatic key lock".
3. Select "On" to activate the automatic key lock, also during an ongoing call.
Tip: It is possible to change the time for activation of this lock (default 20 seconds). It is also
possible to choose whether the handset will not be unlocked automatically at incoming calls
and messages (default), to avoid unintentional key presses, see Activate the Automatic Key
Lock on page 69 and Deactivate the Phone Lock on page 70.
Deactivate the Automatic Key Lock
1. Select “Locks”.
2. Select “Automatic key lock”.
3. Select “Off” for deactivation of automatic key lock.
Activate the Phone Lock
You can protect a handset from unauthorized use. If the Activate phone lock function is activated
you must enter a PIN code at power on, or when the handset is placed in a charger. The phone
lock is activated when the handset is placed in the charger. The default phone lock code (0000)
can be changed to any 4 -8 digit code It is possible too change the time for activation of this
lock (default 20 seconds), see “Automatic lock time” on page 70..
1. Select “Locks.
2. Select "Phone Lock".
3. Select “Auto phone lock”.
4. Select “On”, or "On in charger".
5. Enter a PIN code.
6. Press "OK".
If the PIN code is forgotten it can be removed by your distributor.
Note: You can answer/close an incoming call and/or press the alarm button while the
keypad is locked. If configured in PDM/WSM, you can call an emergency number while
the keypad is locked. See the Mitel 5624 Wireless Handset Configuration Guide.
Note: If configured in the handset, you can call an emergency number while the handset
is locked. See the Mitel 5624 Wireless Handset Configuration Guide.