Mitel 5624 Network Card User Manual


 
Navigate the Menu
71
Display Settings
Screen Saver
1. Select “Display”.
2. Select “Screen saver”.
3. Select “Information”, or “Black””, or “Black also in call”. Time, Owner ID and status infor-
mation is displayed when “Information” is selected, and the display will turn off when the
handset is not used.
4. Press “Back”.
Brightness
1. Select “Display”.
2. Select “Brightness”.
3. Select “Normal” or “Power save”.
4. Press "Back".
Contrast
1. Select “Display”.
2. Select “Contrast”.
3. Increase/decrease the contrast by pressing and on the Navigation key.
4. Press "Back".
Note: It is recommended to only use the screen saver setting “Black also in call”,
when extended battery life is needed. Use also other screen saver settings than
“Black also in call” if the handset needs to be set to silent (muted).
Tip: When using the screen saver “Information”, the Owner ID is also shown when
the handset is in the charger (even if switched off). This simplifies identification when
many handsets are charged together.