Chapter 5. Hardware Requirements of the SME Server V5 with ServiceLink Host Computer
Table 5-2. Hardware Requirements for a Category 1 Server
Architecture PCI-based Pentium-class processor
Processor speed 90 MHz (or better)
Minimum RAM 32 MB (64 MB recommended)
Hard drive IDE or SCSI - at least 1 GB
SCSI adapter SCSI adapter must appear on the supported list (only necessary for SCSI systems)
Ethernet adapters The ethernet adapters installed on your server must appear on the supported list.
Modem (for dialup only) Only modems that are Linux-compatible may be used. WinModems are not supported.
CD-ROM drive ATAPI or SCSI
Floppy drive any
Monitor any
Graphics card any
Mouse none required
Sound card none required
5.2. Hardware Requirements for a Category 2 Server
Table 5-3. Definition of a Category 2 Server
# of Users Up to 40
Usage Light (moderate use of remote access, file sharing and other disk-intensive activity)
Table 5-4. Hardware Requirements for a Category 2 Server
Architecture PCI-based Pentium-class processor
Processor speed 400 MHz (or better)
Minimum RAM 128 MB
Hard drive IDE or SCSI - at least 6 GB
SCSI adapter SCSI adapter must appear on the supported list (only necessary for SCSI systems)
Ethernet adapters The ethernet adapters installed on your server must appear on the supported list.
Modem (for dialup only) Only modems that are Linux-compatible may be used. WinModems are not supported.
24