Filter
Top Products
Chapter 6. Installing And Configuring Your SME Server V5 with ServiceLink Software
The next step after selecting a connection type is to enter the specific parameters representing that connection.
6.11. Server and Gateway Mode - Dedicated
How you configure your server’s external interface depends on whether you are using a dedicated connection or a dialup connection.
Therefore, if you configured your server for "server and gateway mode - dedicated connection" you will be presented with very
different configuration screens than if you configured the server for "server and gateway - dialup connection" (as discussed in the
next section).
6.11.1. Configuring Your External Ethernet Adapter
As you did previously with your local ethernet adapter, you need to configure the driver for your external ethernet adapter. As before,
the software will attempt to detect the card. If it correctly identifies the card, you can proceed using Option 1, "Keep current driver".
If it does not, you will need to manually select the driver.
41