Filter
Top Products
5-5
5. Enter the Starting Point of the Data Registers where the data items will be written into. In this
example, the Starting Point is “12268.”
6. Enter the number of words to be transferred in the “Num Words” dialog box. In this example, the
number of words is “20.”
7. Enter the Database Address (Database Addr.) of the ICC DB where data items are stored and
will be written to the controller registers. In this example, the starting DB address is 2048.
8. Click the “Create” button to create this Service Object
`
1
Introduction
2
System Overview
3
Devices to the
Network
4
ControlLogix PLC
Project
Configuration
5
ETH-1000
Configuration
6
Using EtherNet/IP
Explicit Messaging
7
Terminology