Filter
Top Products
5-8
5.2.3. Configuring the Connection Object for QJ71E71 Ethernet Module
Repeat steps documented in Sections 5.2.1and 5.2.2 to configure the Connection and Service objects
to communicate to the external Ethernet module in the system.
1. Creat a Connection Object first with name Connection2. Enter the IP address of the
Ethernet module and the Port number (e.g. 20481 or Hex5001 as configured in Section 3.4 .
2. Create the Service Objects to read and write 20 words from and to D registers and 10
words from and to Internal Relays.