Filter
Top Products
3.2.3 Connection to the Telephone Network
Connection to telephone network (PSTN) is established via the included telephone cable and
the "Line" jack of the MAM.
To get access to your Mitsubishi Super Modem 56k, the telephone number of the connection
used must be known.
3.2.4 Testing the Telephone Connection
In order to check thetelephone number of the connection used, plugan usual telephone into the
appropriate socket and dialthe number by anothertelephone, or froma mobile. If the telephone
at the appropriate socket rings, the number is correct.
Inorder tocheck ifthe telephoneconnection supports theCLIPfeature, dialfrom theappropriate
connection to another telephone.If the calling numberis shown at the calledparty end, the CLIP
feature is supported.
If calls were successful in both directions, you can connect your Mitsubishi Super Modem. The
modem is now ready to be called and receive messages.
3.2.5 Telephone Exchange System
When connecting to a telephone exchange (PABX), take care if an outside line prefix is neces-
sary.
Mounting and Installation Super Modem 56k (MIM-A01)
Mitsubishi Industrial Modem 3-9
123456
1-b2
2-W
3-a
4-b
5-E
6-a2
Fig. 3-8
The Mitsubishi Super
Modem 56k supports the
a/b leads (3 and 4).