Filter
Top Products
3.3 Mounting
Mount the modem by pushing or snap fitting it onto a DIN rail (top-hat rail 35 mm).
E
ATTENTION
:
P
DANGER:
Mounting Mounting and Installation
3-10 MITSUBISHI ELECTRIC
Antenna
027954541034
-
+
10...40 V DC
SIM-Card
Push
Status GSM
Power
Fig. 3-9:
Pull out the black tab on the device using
a screwdriver and so the device can
snap fit to the DIN rail. You can remove
thedevicefromtherailinthesameway.
Ensure that the retaining mechanism of
the modem snaps cleanly and securely
into the DIN rail.
Fig. 3-10:
Modem mounted on the DIN rail
b
The device must only be used in rooms that are dry and clean.Protect the devi-
ce from humidity, water splashes or heat.
b
Do not subject the device to severe vibration.
b
The device must not be used in environments containing flammable gases,
fumes or dust.