5 - 1 5 - 1
MELSEC-Q
5 POWER SUPPLY MODULE
5 POWER SUPPLY MODULE
5.1 Specification
5.1.1 Power supply module specifications
This section gives the specifications of the power supply modules.
Performance Specifications
Item
Q61P-A1 Q61P-A2 Q62P Q63P
Base loading position Power supply module loading slot
Applicable base unit Q3
B, Q6
B
100 to 120VAC
+10%
-15%
200 to 240VAC
+10%
-15%
100 to 240VAC
+10%
-15%
24VDC
+30%
-35%
Input power supply
(85 to 132VAC) (170 to 264VAC) (85 to 264VAC) (15.6 to 31.2VDC)
Input frequency 50/60Hz ±5% ——
Input voltage distortion factor Within 5% (refer to section 5.1.3) ——
Max. input apparent power 105VA ——
Max. input power —— 45W
Inrush current 20A within 8ms 100A within 1ms
5VDC 6A 3A 6A Rated output
current
24VDC —— 0.6A ——
External output voltage —— 24VDC ±10% ——
5VDC 6.6A or more 3.3A or more 6.6A or more Overcurrent
protection
1
24VDC —— 0.66A or more ——
5VDC 5.5 to 6.5V Overvoltage
protection
2
24VDC ——
Efficiency 70% or more 65% or more 70% or more
Allowable momentary power failure
period
3
Within 20ms
Within 10ms
(at 24VDC input)
Dielectric withstand voltage
Across inputs/LG and outputs/FG
2830VAC rms/3 cycles (2000 m (6562 ft.))
500VAC across
primary and 5VDC
Insulation resistance
Across inputs and outputs (LG and FG separated), across inputs and
LG/FG, across outputs and FG/LG 10M or more by insulation
resistance tester
10M
or more by
insulation resistance
tester
Noise durability
• By noise simulator of 1500Vp-p noise voltage, 1
s noise width and 25
to 60Hz noise frequency
• Noise voltage IEC61000-4-4, 2kV
By noise simulator of
500Vp-p noise voltage,
1
s noise width and
25 to 60Hz noise
frequency
Operation indication LED indication (lit at 5VDC output)
Fuse Built-in (Unchangeable by user)
Application
ERR contact (contact switched off (opened: normally closed contact) at an error stop of CPU
module), for CPU module operating status output
Rated switching voltage,
current
24VDC, 0.5A
Minimum switching load 5VDC, 1mA
Response time OFF to ON: 10ms max. ON to OFF: 12ms max.
Life
Mechanical : More than 2 million times
Electrical : More than 100 thousand times at rated switching voltage, current
Surge suppressor No
Contact
output
section
Fuse No
Terminal screw size M3.5 × 7
Applicable wire size 0.75 to 2mm
2
Applicable solderless terminal RAV1.25 to 3.5, RAV2 to 3.5
Applicable tightening torque 66 to 89N•cm
H 98mm (3.86inch)
W 55.2mm (2.33inch)
External
dimensions
D 90mm (3.55inch)
Weight 0.31kg 0.39kg 0.33kg
5