Monarch 9403 Printer User Manual


 
615 Bar code width is greater than 16 inches or the number
of keywords for your PDF 417 bar code exceeds 928.
Decrease the density or shorten the amount of data to
print the bar code.
616 A bad dot falls on a bar code and the dot cannot be
shifted. A gray box is printed instead of the bar code
for all bar codes except MaxiCode and Data Matrix. If
bad dots are present with MaxiCode, the bar code does
not print. Call Customer Service to order a new
printhead or printhead kit.
618 Magnification must be 1 to 7.
619 The JIS (16-bit) code for Kanji is invalid.
620 Font and printhead dot density mismatch. A 300 dpi
font is specified in the format, but a 203 dpi printhead is
used in the printer or vice-versa. Check the font or
change the printhead to correct the error.
621 An error occurred opening the TrueType font file. Select
a different font to download. If the error message
persists, call Technical Support.
622 Not enough memory to create the downloaded TrueType
characters in the scalable (vector) fonts buffer.
Reconfigure the printer’s memory and increase the
scalable (vector) fonts buffer. Resend the font, format,
and batch packet after reconfiguring the memory. See
"Reconfiguring Memory" for more information. If the
error message persists, call Technical Support.
8-20
Diagnostics and Errors