Filter
Top Products
PRINTER DIFFERENCES
E
Here are the major features and differences between each printer
and a 9446 printer. Specific 1464/1465 printer applicator information
is listed. Earlier printer versions may not support all features.
Printer Comparison
Feature 9403 V1.0 9805 V1.0 9820 V2.0 9830 V5.2 9835 V5.2 9840 V6.1 9850 V1.0 9446 V5.2
Printhead Density
dots per inch (DPI)
203 DPI
This causes print to be
approximately 5%
smaller than 192 DPI.
This is most noticeable
on large graphics. It
also changes the actual
printed bar code bar
dimensions and density.
Density selectors relate
to the closest, next
smallest dimension
available.
203 DPI
This causes print to be
approximately 5%
smaller than 192 DPI.
This is most noticeable
on large graphics. It
also changes the actual
printed bar code bar
dimensions and density.
Density selectors relate
to the closest, next
smallest dimension
available. Existing 9446
formats print without
negatively effecting
non-print zones or label
boundaries.
203 DPI
This causes print to be
approximately 5%
smaller than 192 DPI.
This is most noticeable
on large graphics. It
also changes the actual
printed bar code bar
dimensions and density.
Density selectors relate
to the closest, next
smallest dimension
available. Existing 9446
formats print without
negatively effecting
non-print zones or label
boundaries.
203 DPI
This causes print to be
approximately 5%
smaller than 192 DPI.
This is most noticeable
on large graphics. It
also changes the actual
printed bar code bar
dimensions and density.
Density selectors relate
to the closest, next
smallest dimension
available. Existing 9446
formats print without
negatively effecting
non-print zones or label
boundaries.
203 DPI
This causes print to be
approximately 5%
smaller than 192 DPI.
This is most noticeable
on large graphics. It
also changes the actual
printed bar code bar
dimensions and density.
Density selectors relate
to the closest, next
smallest dimension
available. Existing 9446
formats print without
negatively effecting
non-print zones or label
boundaries.
203 DPI
This causes print to be
approximately 5%
smaller than 192 DPI.
This is most noticeable
on large graphics. It
also changes the actual
printed bar code bar
dimensions and density.
Density selectors relate
to the closest, next
smallest dimension
available. Existing 9446
formats print without
negatively effecting
non-print zones or label
boundaries.
203 DPI
This causes print to be
approximately 5%
smaller than 192 DPI.
This is most noticeable
on large graphics. It
also changes the actual
printed bar code bar
dimensions and density.
Density selectors relate
to the closest, next
smallest dimension
available. Existing 9446
formats print without
negatively effecting
non-print zones or label
boundaries.
192 DPI
Maximum print speed 2.0 IPS 4.0 IPS
6.0 IPS (V2.0 or greater)
6.0 IPS 6.0 IPS 6.0 IPS 6.0 IPS 10.0 IPS 7.0 IPS (10.0 IPS
with high speed model)
Maximum print area 2.0" x 6.0" 4.0" x 6.0" 4.0" x 12.0" 4.0" x 16.0" 4.0" x 16.0" 4.0" x 16.0" 4.0" x 16.0" 4.0" x 8.0"
Non-Print Zone .035" at the beginning
and .10" from the left
edge
Recommended: all
supplies - .05" on either
edge and .02" at the end
Recommended: all
supplies - .05" on either
edge and .02" at the end
Recommended: all
supplies - .05" on either
edge and .02" at the end
Recommended: all
supplies - .05" on either
edge and .02" at the end
Recommended: all
supplies - .05" on either
edge and .02" at the end
Recommended: all
supplies - .05" on either
edge and .02" at the end
Software imposed
non-print zone on all
supplies - .06" on the
left side of the supply.
There is no non-print
zone at the beginning or
at the end of the supply.
Location of Print Area Left Center Center Center Center Center Center Left
Supply Width .75" x 2.5" 1.2" x 4.25" 1.2" x 4.25" 1.2" x 4.25" .75" x 4.25" .75" x 4.25" .75" x 4.25" 1.2" x 4.2"
Supply Length .75" x 9.0" 1.0" x 6.5" 1.0" x 12.0" .50" x 16.0" .75" x 16.0" .32" x 16.0 .32" x 17.5" .75" x 8.0"
Power Up Mode Online/
Offline
Online Online Online Online
Offline
Online
Offline
Online
Offline
Online/Offline
Feed Mode Continuous On demand/Peel
Mode/Continuous
Continuous On demand/Peel
Mode/Continuous
On demand/Peel
Mode/Continuous
On demand/Continuous On demand/Peel
Mode/Continuous
On demand/
Continuous/ Internal
Rewind
Printer Differences
E-1