Filter
Top Products
Fiber Driver
®
EM316SW-XY
PN 1288003-001, Rev D2
17
Step 2. Install the module inside a Fiber Driver chassis by aligning the edge of the card with the
rail of the chassis. Tighten the thumbscrew by hand.
Figure 11 -- Module installation (not all chassis are shown)
Figure 12 -- Correctly inserted Fiber Driver module in a powered chassis
Handle the module by the edges to avoid damaging any components. Use your thumb to push it
securely into the chassis slot. Do not use excessive force, but make sure the module connector
is fully inserted in the chassis. Secure the module by hand using the thumbscrew.