Filter
Top Products
Fiber Driver
®
EM316SW-XY
PN 1288003-001, Rev D2
38
4.3.5.2 Other Commands
The commands available at the chassis level are consistent in Fiber Driver environments.
These general system features are beyond the scope of this document. A list of available
commands in the chassis context is displayed by typing “?” or “list” at the prompt.
For a list of available commands in any context, type “?” or “list” at the prompt or refer to
EM316LNXNM-OT manuals.
fiberdriver(chassis/1)# ?
chassis Configure a chassis
default Restore parameter(s) to defaults
description Set chassis name
echo Display text for scripting
end End current context and go down to initial command context
exit Exit current context and go down to previous context
gen-trap Enable trap generation for the chassis
list Print command list
logout Logout of the system
map Configure port map for entire current context
next Configure next element
no Negate a command
pager Pause scrolling when screen is full
port Configure a port
previous Configure previous element
quit Exit current context and go down to previous context
show Show basic info
sleep Pause CLI for scripting
slot Configure a slot
temperature-limit Adjust high-temperature limit (deg. C)
temperature-min Adjust low-temperature limit (deg. C)
who Find out who is connected to the system
whoami Who am I?
write Write running configuration to memory or terminal
fiberdriver(chassis/1)#