Filter
Top Products
Fiber Driver
®
EM316SW-XY
PN 1288003-001, Rev D2
42
4.3.6.3 “show”
The “show” command displays management and system information related to the
EM316LNXNM-OT management module, the hosting chassis, other modules in the chassis,
and ports available within the managed system. The arguments (parameters) following the
show command and the operational context displayed by the system prompt control the
many functions available through this command.
The next box displays the CLI help for the show command in the slot-level context of the
EM316SW-XY modules. The first command (shown in bold) is “show?” and the second
command (also in bold) is “show ?”. The subtle difference between the two commands is the
space separating the command from the “?” in the second command.
The box below illustrates the show command applied with no arguments in the slot-level
context of an EM316SW-XY module.
fiberdriver(slot/1.4)#
s
how?
show Show basic info
fiberdriver(slot/1.4)# show ?
<cr> Show basic info
config Show administrative configuration for this object
defaults Show default configuration for this object
digital-diagnostics Show Digital Diagnostics summary
redundancy Show slot redundancy info
running-config Current operating configuration
statistics Show port info
fiberdriver(slot/1.4)# show
fiberdriver(slot/1.3)#
s
how
Slot: 1.3
Model: EM316SW-XY
Name: EM316SW-XY at 1.3
Hardware Revision: 1, FPGA 0x68
Sw Configurable: yes Operation Type: redundant
Redundancy: enabled
Number Of Ports: 4
Port Enable Link LIN Speed DDiags WL(nm) Name
===== ======= ========= ======= ======== ====== ====== ==============
1.3.1 enable no Signal disable 10 Mbps N/A N/A RJ-45 at 1.3.1
1.3.2 enable no Signal disable 100 Mbps Alarm 850 SFP at 1.3.2
1.3.3 enable no Signal disable 100 Mbps Alarm 850 SFP at 1.3.3
1.3.4 disable no Signal N/A N/A N/A N/A RJ-45 at 1.3.4
fiberdriver(slot/1.3)#