Filter
Top Products
2 Installation
5
MultiModemZBA-V-V92 User Guide
Chapter 2 - Installation
This chapter shows you step-by-step how to set up your Multi-Tech data/fax/voice modem and make
your first calls.
Safety Warnings
• Use this product only with UL- and CUL-listed computers (U.S.A. and Canada)
• To reduce the risk of fire, use only 26 AWG (.41mm) or larger telephone wiring.
• Never install telephone wiring during a lightning storm.
• Never install a telephone jack in a wet location unless the jack is specifically designed for wet
locations.
• Never touch uninsulated telephone wires or terminals unless the telephone line has been
disconnected at the network interface.
• Use caution when installing or modifying telephone lines.
• Avoid using a telephone during an electrical storm; there is a risk of electrical shock from
lightning.
• Do not use a telephone in the vicinity of a gas leak.
Step 1: Mount the Feet
The modem comes with a strip of self-adhesive plastic feet, which you can optionally mount on the
modem. To install the feet, simply peel them from their paper strip and press them into the recesses
on the bottom of the modem.
Figure 2-1. Mounting the feet.