Filter
Top Products
2 Installation
11
MultiModemZBA-V-V92 User Guide
Step 5: Configure the Modem for Your Country
Different countries have different requirements for how modems must function. Therefore, before you
use your modem, you must configure it to match the defaults of the country in which you are using it.
You must also do this if you move the modem to another country after it has been configured for the
first country. You can use one of two configuration methods:
1. Use the Global Wizard to Configure Your Modem
2. Use AT Commands to Configure Your Modem
Using the Global Wizard to Configure Your Modem
The Global Wizard configuration utility is recommended for computers running Windows 95 or newer.
1. Insert the MultiModemZBAV-V92 CD into the CD-ROM drive. The Autorun menu should appear.
2. Click Initial Setup and Country Selection.
3. Choose either:
- Run Global Wizard from CD. This will not load the wizard onto your hard drive, or
- Install Global Wizard on the HD. This will install the wizard onto your hard drive for future use.
4. The Global Wizard dialog box appeard. Click Next.
5. The Global Wizard searches for your modem and identifies it. Click Next.
6. Select the country in which the modem will be used. Click Next.
7. Review your choice of country. If it is correct, click Next to configure the modem.
8. When Global Wizard announces that the parameters have been set, click Finish to exit.
Using AT Commands to Configure Your Modem
Non-Windows users can configure the modem using AT commands. You must enter these
commands in your communication program’s terminal window.
1. Run your favorite communication program, and open the program’s terminal window.
2. To configure the modem for a specific country, type AT%T19,0,
nn
, where
nn
is the country code
in hexadecimal notation, and then press ENTER. The message OK displays.
3. To verify the change, type ATI9 and press ENTER. The country code displays in decimal format.
Country AT Command (hexadecimal) Result code (decimal)
Euro/NAM AT%T19,0,34 (default) 52
A complete list of country codes can be found on the Multi-Tech Web site at
http://www.multitech.com/GlobalModem/config.