Filter
Top Products
6 Callback Security
63
MultiModemZBA-V-V92 User Guide
Command: #CBFR Callback Failed Attempts Reset
Values: n/a
Default: n/a
Description: Resets the number of failed callback passwords to 0. This does
not reset the number stored in nonvolatile memory. This
command can be used only after the setup password has been
entered and callback security enabled.
Command: #CBI
n
Local Callback Inactivity Timer
Values:
n
= 1–255
Default: 20
Description: Sets the time (in minutes) that the modem waits for a command
before forcing the user to enter the setup password again. This
command can be used only after the setup password has been
entered and callback security has been enabled for local/
remote operation (#CBS1).
Command: #CBN
y
=
x
Store Callback Password
Values:
y
= 0–29
x
= password (6–10 characters)
Defaults: None
Description: Sets the callback security password for the
y
memory location.
The password must contain 6 to 10 characters, and cannot
include the
+
or
-
characters. This command can be used only
after the setup password has been entered and callback
security enabled.
Command: #CBP
n
Callback Parity
Values:
n
= 0, 1, or 2
Default: 0
Description: Sets parity for the callback security messages. The parity of
the messages should match the parity of the computer the
modem is attached to. This command can be used only after
the setup password has been entered and callback security
enabled.
#CBP0 No parity.
#CBP1 Odd parity.
#CBP2 Even parity.
Command: #CBRy Callback Security Reset
Values:
y
= 0–29
Default: None
Description: Clears the password and phone number in the
y
memory
location. This command can be used only after the setup
password has been entered and callback security enabled.