Filter
Top Products
29
Chapter 2 - Quick Start
MT5634ZLX/FE
Artisoft Lantastic 6.0 Installation
1. Install LANTASTIC 6.0.
2. Run INSTALL.EXE from the MT5634ZLX/FE driver disk root directory.
3. Select LANTASTIC 6.0 in Network Operating System screen, then Driver Install screen.
4. If current settings are correct, select Start Installation and go to step 6. Otherwise, select
Modify Parameters to make changes.
5. Move the cursor to each field you want to modify, make modifications, click Enter to set the
correct value, then click OK.
6. The Installation program starts copying drivers and modifying CONFIG.SYS,
PROTOCOL.INI, and STARTNET.BAT.
7. Reboot the computer.
For Non-Windows 95/98/NT Systems
Insert the driver diskette into the floppy drive and set the current drive to the floppy drive (A:\).
Then run INSTALL to install the dirver.
Novell NetWare Installation
Follow the steps bellow to complete the Novell Netware installations.
1. Run the installation program INSTALL.EXE from the Driver disk (for example, A:\INSTALL).
2. Select Netware 3.x and 4.x Workstation in the installation program dialog box.
3. Check the card settings. If current settings are correct, select Start Installation and go to
step 5. Otherwise, select Modify Parameters to change settings.
4. Select the appropriate values then click Enter. When you are finished, click OK to exit.
5. The installation program starts installing drivers and modifying AUTOEXEC.BAT and
NET.CFG.
Select Yes then click Enter to modify the files. The installation is now complete.
6. Restart your computer to make NetWare connections.
To install the ODI driver manually, follow the instructions below:
1. Copy the file \NETWARE\LMODI.COM \NETWARE\NET.CFG and the file
\ENABLER\LMVXD.386 from the driver disk to your local hard disk.
2. Use a text editor to edit the NET.CFG for setting the frame type. The frame type default is set
to 802.3 for Netware 3.11 server and 802.2 for Netware 3.12 and 4.x servers. The frame type
set in NET.CFG must match that set in Netware servers.
3. Use following format to create a startup batch file:
LSL ;Link Support Layer Module
;provided by Novell
LMODI ;Hardware Specific Module
IPXODI ;IPX Protocol Stack Module
;provided by Novell
NETx ;Shell Support Module provided by
;Novell
LOGIN